Installation
Step 3
Install
Side Panels
• Side panels are required whenever the sides of the
product will be exposed and when installed between
frameless cabinets. See pages 3 and 4.
• Side panels are not required when installed into an
enclosure.
• Side panel installation will be determined bythe
design of the side panel you have previously chosen.
• Side panels must be installed plumb.
Illustration A
1/4" SidePanels-
Insert end of side
panel into casetrim.
23-9/16"
84" _F2-9/16"
TopView
Standard4"hightoekickortrimto fit. Height
mayvarydependingonapplication.
• If you choose to use 1/4"side panels, they should be
inserted into the case trim as illustrated. Fasten the
panels to the product with stick-on hook and loop
fastener strips before setting in place. See
illustration A.
• 1/2"to 3/4" side mnels are normally set into place and
fastened to adjacent cabinetry or the back wall before
rolling the product into the opening. See illustration B.
IllustrationB
1/2"to 3/4" Side
Panels- Leading
edgeofsidepanelis
flushwithcabinet
front.Fastento the
backwall usinga
cleat.
TopView
24-3/4"
T 3_3/4"
Standard 4" high toekick or trim to fit.
Height mayvary depending on application.
Step 4
Install
Anti-Tip
Brackets
] 0
ANTI-TIP PRECAUTIONS
Therefrigeratoris top-heavy andmustbe secured
to preventthe possibilityoftippingforward.
PRECAUTIONSCONTRELESBASCULEMENTS
Le refrigcrateur est beaucoupplus Iourd en haut
et il faut le maintenir en place pour eviter la
possibilite de sonbasculement vers ravant.
• Cut a 2" x 4"x 35"block and secure the block to
the mounting brackets provided using #12 or #14 wood
screws.
• Secure the bracket with wood block to the back wall
so that it is 84" (or your installation height) from the
finished floor. Use #12 or #14wood screws. See
illustration.
• Screws must penetrate atleast one inch into vertical
wall studs.
• Before pushing the refrigerator into the opening, plug
the power cord into the receptacle. Open the grille
panel and reach into the opening at the back to grasp
the power cord. Pull the power cord into the opening
as you push the refrigerator back.
• 6ently push refrigerator into the opening with hands
against front corners.
Brackets
Required
Height
From
Floor
to
Bottom
ofWood
Block
SideView
Brackets
NotRequired
Beneatha
Soffit
2 x4 CutJ
35"Length
Installation Mounting
Height Bracket
FromFloor
ScrewsMountedintoJ
VerticalWall Studs
IMPORTANTNOTE:Whenthe refrigeratoris installed undera soffit
or if there isnot enoughheight for this methodofsecurity,brackets
cannotbe used.Proceedto step5 to levelthe refrigeratorand then
to step6 to securerefrigeratorto cabinets.Therefrigeratormustbe
securedto preventtipping.
(20 pages)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commentaires sur ces manuels