Monogram ZISS480N Manuel du propriétaire télécharger pdf (Page 9)

Design Guide

DISPENSER MODELS:

RAISED OVERLAY PANEL DESIGN

When a raised panel design is to be used, a

custom wide middle rail is required to accept

the dispenser trim.

• The middle rail must be wide enough to allow

for the dispenser trim to overlap the opening.

• The middle rail must be 1.100" total thickness

to accept the dispenser trim.

16-3/4"

J

Dispenser

Trim

10-5/8%___,.

1/4" Backer

.10"SF

3/4"OverlayPanel

Wide

Middle

Railis

Required

DISPENSER TRIM FIT EXAMPLES:

(NOT TO SCALE)

1/4" FRAMED PANEL

• The dispenser trim fits over the

custom panel and snaps into the

freezer door.

• The clips will not engage the door if

the panel is more than 0.250" thick.

• If the panel is less than 0.250" thick,

a noticeable gap may be created

around the dispenser trim.

3/4" OVERLAY PANEL

• The dispenser trim fits over the

custom panel and snaps into the

freezer door.

• The clips will not engage the door if

the panel is more than 1.100" thick.

• If the panel is less than 1.100" thick,

a noticeable gap mav be created

around the dispenser trim.

1/4"

Framed

1/4"Backer Panel

.lO"Spacer

Panel

FREEZERDOOR

1/4"DispenserTrim

FREEZERDOOR

3/4"Overlay Dispenser Trim

0.250"

Thick

1.100"

Total Thickness

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 19 20

Commentaires sur ces manuels

Pas de commentaire