Monogram WX08X10025 Manuel du propriétaire télécharger pdf (Page 21)

Mounting

Bracket

2 x 4 Cut

35" Length

Installation

Height

From Floor

Screws Mounted into

Vertical Wall Studs

STEP 2A INSTALLATION WITH

HOUSEHOLD WATER

FILTRATION SYSTEM

Skip this step if you do not have a household

water filtration system

If the water supply to the refrigerator is from any

household water filtration system, the filter cartridge

should be removed. For better ice and water

performance, remove the filter and install the filter

bypass plug.

STEP 3 INSTALL SIDE PANELS

Skip this step when not using side panels.

If you are using 1/4" side panels, they should be

inserted into the case trim. Fasten the panels to the

refrigerator with stick-on hook and loop fastener

strips before setting refrigerator in place.

STEP 4

INSTALL ANTI-TIP BRACKETS

WARNING: ANTI-TIP PRECAUTIONS

The refrigerator is top-heavy and must be secured to

prevent the possibility of tipping forward.

ATTENTION: PRECAUTIONS CONTRE LES

BASCULEMENTS

Le réfrigérateur est beaucoup plus lourd en haut et il

faut le maintenir en place pour éviter la possibilité de

son basculement vers l’avant.

• Cut a 2" x 4" block, 35" long and secure the block

to the mounting brackets provided using #12 or #14

wood screws.

• Secure the bracket with wood block to the back wall

so that it is 84" (or your installation height) from

the finished floor. Use #12 or #14 wood screws.

See illustration.

• Screws must penetrate at least one inch into vertical

wall studs.

• Before pushing the refrigerator into the opening,

plug the power cord into the receptacle. Open the

grille panel and reach into the opening at the back

to grasp the power cord. Pull the power cord into

the opening as you push the refrigerator back.

• Gently push refrigerator into the opening with

hands against front corners.

IMPORTANT NOTE: When the refrigerator is installed under a soffit or

if there is not enough height for this method of security, brackets cannot

be used. Proceed to step 5 to level the refrigerator and then to step 7

to secure refrigerator to cabinets. See step 6 if you have metal wall

studs. The refrigerator must be secured to prevent tipping.

Rotate

Clockwise

To Remove

Filter

Bypass

Plug

Block

Soffit

Side View

Height

From

Floor

Bottom

of Wood

Block

Brackets

Required

Brackets

Not Required

Beneath a

Soffit

Installation Instructions

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 27 28 29

Commentaires sur ces manuels

Pas de commentaire

Monogram WX08X10025 Manuel du propriétaire Page 21

Commentaires sur ces manuels

Produits connexes et manuels pour Réfrigérateurs Monogram WX08X10025